Datasheet

CFDISK.2A - 2D dimensions (phased out – special order only)
This is the 44 pin IDE version, designed for use with embedded PC system boards. The board is designed to
have the same outline and pinout as a 2.5”hard disk drive, but will not match the vertical profile of modern
2.5” drives. The 44 pin connector includes power, there is no separate power connector. The CF connector
supports type I and type II cards.
CFDISK.2E / 2F / 2G dimensions
This version has the same outline, but is designed to match the vertical profile of 2.5” drives. This board is
mounted through threaded stand-offs from the bottom side. The 44 pin connector includes power, there is
no separate power connector. The CF connector supports type I and type II cards.
Change history:
CFDISK.2G Change to CSEL cable select instead of hard-wired master / slave.
CFDISK.2F Added IDE DMA support.
CFDISK.2E Straddle mount connector, threaded standoffs
CFDISK.2D Made in Taiwan
CFDISK.2C Assembled in USA, all ceramic bypass capacitors, delete master / slave jumper,
change CF header
CFDISK.2B Assembled in USA, no stuff redundant bypass capacitors, change CF header
CFDISK.2A Assembled in USA, SMT electrolytic bypass capacitors