Installation Guide

ManualsBrandsUnbranded ManualsBathLydia 27 in. W x 10.5 in. D x 66.5 in. H Space Saver in. White

Summary of content (8 pages)

PAGE 1
PAGE 2
PART LIST Front Top Rail Back Top Rail Back Bottom Rail Right Side Panel Up Fixed Shelf Down Fixed Shelf Left Side Panel Up Back Panel Down Back Panel Top Panel Shelf Panel Left Door Right Door
PAGE 3
HARDWARE LIST Cam Lock Ø15*12mm Bolt Ø6*25mm Cam Bolt Ø6*42mm Screw Ø3*15mm Wood Dowel Shelf Support Ø8*30mm Ø6.5mm Knob Ø29*27mm Round Head Bolt Ø5/32"*19mm Magnet L70*H12mm Wall Anchor Ø8*38mm Screw Ø4*38mm Hook W40*38mm Screw Ø3*12mm Allen Key 4mm EXTRA HARDWARE LIST ADDITIONAL TOOLS ( Not Provided) Note: It is not recommended to use power tools during assembly.
PAGE 4
Step 1. Attach Knob (G) to Doors (12 & 13) using Round Head Bolt (H) . Attach Magnet (I) to Front Top Rail (1) using Screw (E) . The magnet need toward outside Step 2. Fix Cam Bolt (B) to Side Panels (6 & 7) and Top Panel (10),as shown .
PAGE 5
Step 3. Attach Back Bottom Rail (3) to Right Side Panel (6) using Wood Bolt (D) and Allen Key (N) . Attach Top Rail (1 & 2 ) and shelf (4 & 5 ) to Right Side Panel (6) using Wood Dowel (C) and Cam lock (A) . NOTE: Do not fully tighten Cam locks at this time. Step 4. Set Left Side Panel (7) into place using Wood Dowel (C),Bolt (D) and Cam lock (A) . NOTE: Once Left Side Panel are in place, fully tighten all Cam locks.
PAGE 6
Step 5. Set Top Panel (10) into place using Wood Dowel (C) and Cam lock (A) . Step 6. Set Back Panel (8 & 9) into place using Screw (E) .
PAGE 7
Step 7. Attach Hook (L) to Side Panels (6 & 7) using Screw (M) . Step 8. Set Wood Door (12 & 13) into place .
PAGE 8
Step 9. Drill two 11/32" holes where you want to secure your pantry .The hole should be at the same height as the hole in the back panel (Part #8) of this unit . Tap Wall Anchor(J) into the hole . Insert Screw (K) through Back Panel (8) into Wall Anchor (J). Wall Step 10. Attach Shelf Support (F) into the hole .Insert Shelf Panel (11) to place .