BP7522 Ideal CF330 02152017.qxp_CF330 2/15/17 11:44 AM Page 1 CONTEMPORARY READ AND SAVE THESE INSTRUCTIONS IDEAL™ 54” Ceiling Fan Owner's Manual Model Numbers CF330BQ00 - Barbeque Black CF330GRT00 - Graphite CF330SW00 - Satin White Net Weight: 15.8 Lbs. Questions, problems, missing parts: Before returning to the store call Emerson Electric Customer Service - 8 a.m. - 6 p.m., Eastern, Monday-Friday Part No. F40BP75220000 Revision: 170215 1-800-654-3545 www.emersonfans.
BP7522 Ideal CF330 02152017.qxp_CF330 2/15/17 11:44 AM Page 2 Table of Contents Section Page Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1. Unpacking Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 2. Electrical Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3. Ceiling Fan Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9 4. How to Hang Your Ceiling Fan . . . . . . . . . . . . . . . . .
BP7522 Ideal CF330 02152017.qxp_CF330 2/15/17 11:44 AM Page 3 1. Unpacking Instructions NOTE: Place the parts from the hardware bags in a small container to keep them from being lost. If any parts are missing, call 1-800-654-3545 for replacement parts before proceeding. WARNING ! Do not install or use fan if any part is damaged or missing.
BP7522 Ideal CF330 02152017.qxp_CF330 2/15/17 11:44 AM Page 4 1. Unpacking Instructions (Continued) This Manual Is Designed to Make it as Easy as Possible for You to Assemble, Install, Operate and Maintain Your Ceiling Fan Tools Needed for Assembly One Phillips Head Screwdriver One 1/4” Blade Screwdriver Materials Your Emerson Ceiling Fan comes supplied with a DC Receiver and Fan Wall Control. This system allows you to regulate your ceiling fan speed and light control.
BP7522 Ideal CF330 02152017.qxp_CF330 2/15/17 11:44 AM Page 5 3.1 3. Ceiling Fan Assembly Flip the upper foam pad over and place on a stable working surface. SHIPPING RETAINERS (3) MOTOR HUB Remove the fan motor assembly from the protective plastic bag. Place fan motor assembly on top of the foam pad with the upper motor cover supporting the weight of the motor. Remove and discard the three Shipping Retainers securing the Motor Hub in the Motor Housing (Figure 1).
BP7522 Ideal CF330 02152017.qxp_CF330 2/15/17 11:44 AM Page 6 3. Ceiling Fan Assembly 3.3 (Continued) NOTE: Take care not to scratch the fan housing when installing the blade assemblies. 1/4-20 x 1/2" OVAL HEAD SCREWS (2 per assembly) Attach the Blade Flange Assembly onto the Fan Motor/ Hub by tightening the 1/4-20 x 1/2” Oval Head Screws securely (Figure 3).
BP7522 Ideal CF330 02152017.qxp_CF330 2/15/17 11:44 AM Page 7 3.5 3. Ceiling Fan Assembly Remove the Hanger Ball by loosening the Phillips Head Set Screw in the Hanger Ball until the Ball falls freely down the 4.5” Downrod (Figure 5). (Continued) GREEN GROUND WIRE PIN Remove the Pin from the 4.5” Downrod, then remove the Hanger Ball (Figure 5). 4.5" DOWNROD Retain the Pin and Hanger Ball for reinstallation in Step 3.11.
BP7522 Ideal CF330 02152017.qxp_CF330 2/15/17 11:44 AM Page 8 3. Ceiling Fan Assembly 3.8 (Continued) Align the Clevis Pin holes in the Downrod with the holes in the Motor Coupler. Install the Clevis Pin and secure with the Hairpin Clip (Figure 8). HAIRPIN CLIP CLEVIS PIN The Clevis Pin must go through the holes in the Motor Coupler. It is critical that the Clevis Pin in the Motor Coupler is properly installed and securely tightened.
BP7522 Ideal CF330 02152017.qxp_CF330 2/15/17 11:44 AM Page 9 3.11 3. Ceiling Fan Assembly Route the two 80” Motor Wires through the Hanger Ball (Figure 11). (Continued) PIN Reinstall the Hanger Ball on the Downrod as follows: Position the Pin through the two holes in the Downrod and align the Hanger Ball so the Pin is captured in the groove in the top of the Hanger Ball (Figure 11).
BP7522 Ideal CF330 02152017.qxp_CF330 2/15/17 11:44 AM Page 10 4. How to Hang Your Ceiling Fan ! WARNING ! WARNING CEILING The fan must be hung with at least 7' of clearance from floor to blades (Figure 13). To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. NOTE: If you are not sure if the outlet box is grounded, contact a licensed electrician for advice, as it must be grounded for safe operation.
BP7522 Ideal CF330 02152017.qxp_CF330 2/15/17 11:44 AM Page 11 4. How to Hang Your Ceiling Fan ! WARNING The outlet box and joist must be securely mounted and capable of supporting at least 50 lbs. Use only a U.L. outlet box listed as “Acceptable for Fan Support of 22.7 kg. (50 lbs.) or less”. ! OUTLET BOX TWO SCREWS SUPPLIED WITH OUTLET BOX WARNING To reduce the risk of fire, electric shock, or personal injury, mount fan to outlet box marked “Acceptable for Fan Support of 22.7 kg. (50 lbs.
BP7522 Ideal CF330 02152017.qxp_CF330 2/15/17 11:44 AM Page 12 5. How to Wire Your Ceiling Fan If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician. ! WARNING GROUND CONDUCTOR SUPPLY To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring.
BP7522 Ideal CF330 02152017.qxp_CF330 2/15/17 11:44 AM Page 13 5.2 5. How to Wire Your Ceiling Fan (Continued) Securely connect the Fan Motor White Wire to the Supply White (neutral) Wire using Wire Connector (supplied) (Figure 17). SUPPLY WHITE (NEUTRAL) LISTED WIRE CONNECTOR FAN MOTOR WHITE WIRE Figure 17 5.3 Securely connect the Fan Motor Black Wire to the Supply Black (hot) Wire using Wire Connector (supplied) (Figure 18).
BP7522 Ideal CF330 02152017.qxp_CF330 2/15/17 11:44 AM Page 14 6. Final Assembly 6.1 Engage the Fan Motor 2-Pin Wire Connector into the 2-pin Wire Connector of the LED Array (Figure 20). The connection is complete when you hear a soft click. FAN MOTOR 2-PIN WIRE CONNECTOR LED ARRAY 2-PIN WIRE CONNECTOR LED ARRAY Figure 20 6.2 Carefully tuck all the wires and connectors into the Light Kit Housing Assembly. Position the LED Array onto the Light Kit Housing Assembly, aligning the three holes.
BP7522 Ideal CF330 02152017.qxp_CF330 2/15/17 11:44 AM Page 15 6. Final Assembly 6.4 (Continued) Screw the two Threaded Studs (supplied) into the tapped holes in the Hanger Bracket (Figure 23). HANGER BRACKET HOLES (2) THREADED STUDS (2) Figure 23 6.5 Lift the Ceiling Cover up to the Threaded Studs and turn until studs protrude through the holes in the Ceiling Cover (Figure 24).
BP7522 Ideal CF330 02152017.qxp_CF330 2/15/17 11:44 AM Page 16 7. Wall Control Installation 7.1 7.2 Preset Memory Feature: Your Emerson receiver is equipped with a preset memory feature. If the AC supply to the receiver is powered OFF through a wall switch, the control will remember the light intensity and fan speed. When the switch is turned back ON the light and fan will resume operation as they were prior to the switch being turned OFF.
BP7522 Ideal CF330 02152017.qxp_CF330 2/15/17 11:44 AM Page 17 7.5 7. Wall Control Installation (Continued) This control is designed to operate only one ceiling fan NOTE: Electric connections should be in accordance with the National Electrical Codes and all Local Codes. Before starting, disconnect power to the circuit at the fuse box or circuit breaker panel. Remove the Faceplate and Screws from the Existing Wall Switch. Pull Switch out from Wall Outlet Box.
BP7522 Ideal CF330 02152017.qxp_CF330 2/15/17 11:44 AM Page 18 7. Wall Control Installation SINGLE-POLE INSTALLATION (One fan controlled by one wall control) (See Figure 28). BLK BLACK WARNING ! WARNING ! WARNING Do not connect any neutral (white) wire to this control. Incorrect wiring will damage this control. LOAD NEUTRAL BLACK GROUND ! Turning off wall switch is not sufficient.
BP7522 Ideal CF330 02152017.qxp_CF330 2/15/17 11:44 AM Page 19 3-WAY INSTALLATION (One fan controlled by two different wall controls) (See Figures 29 and 30). WARNING BLK SECONDWALL CONTROL PURCHASE SEPARATELY FAN/LIGHT WALL CONTROL GROUND Turning off wall switch is not sufficient. To avoid possible electrical shock, be sure electricity is turned off at the main fuse or circuit breaker box before wiring.
BP7522 Ideal CF330 02152017.qxp_CF330 2/15/17 11:44 AM Page 20 7. Wall Control Installation ! 3-WAY WIRING DIAGRAM: WARNING NOTE: Retrofit 3-way installations are likely to include two traveler wires between the two wall boxes. In new construction, only one traveler wire Is required (See Figure 30). Check to see that all connections are tight and that no bare wires are visible at the wire connectors. 7.
BP7522 Ideal CF330 02152017.qxp_CF330 2/15/17 11:44 AM Page 21 8. Programming the Receiver Operating Frequency & High Speed Conditioning of Fan Control -- Important - Read This Section Carefully and Follow the High Speed Conditioning Instructions Closely -8.2 PROGRAMMING THE RECEIVER OPERATING FREQUENCY & HIGH SPEED CONDITIONING OF FAN CONTROL If programming is unsuccessful, retry the previous instructions after cycling the wall control ON/OFF switch to restart the 1 minute programming time period.
BP7522 Ideal CF330 02152017.qxp_CF330 2/15/17 11:44 AM Page 22 ! 9. Using Your Ceiling Fan WARNING Fan installation must be completed, including the installation of the fan blades, before testing the wall control. POWER INDICATOR LIGHT Your Wall Control has full control of your Fan and Light (Figure 31). AIRFLOW DIRECTION 9.1 POWER BUTTON NOTE: Prior to operation of the fan and light from the wall control, set the fan speed to HIGH (....) and turn the light ON ( ).
BP7522 Ideal CF330 02152017.qxp_CF330 2/15/17 11:44 AM Page 23 10. Maintenance IMPORTANT CARE INSTRUCTIONS for your Ceiling Fan ! WARNING ! WARNING Do not use water when cleaning your ceiling fan. It could damage the motor or the blades and create the possibility of an electrical shock. Periodic cleaning of your new ceiling fan is the only maintenance that is needed. When cleaning, use only a soft brush or lint free cloth to avoid scratching the finish.
BP7522 Ideal CF330 02152017.qxp_CF330 2/15/17 11:44 AM Page 24 12. Repair Parts 1 HARDWARE BAG 4 2 15 5 6 3 5 7 8 9 6 16 7 9 8 17 10 18 11 10 12 19 12 20 13 21 11 14 22 23 13 25 24 24 ETL Model No.
BP7522 Ideal CF330 02152017.qxp_CF330 2/15/17 11:44 AM Page 25 12. Repair Parts Listing Model Numbers Key No. * 1 2 3 Description Hanger Ball Assembly, Consisting of: Hanger Bracket (1) Hanger Ball (1) 4.
BP7522 Ideal CF330 02152017.qxp_CF330 2/15/17 11:44 AM Page 26 13. Troubleshooting ! WARNING FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE TROUBLESHOOTING YOUR FAN. TROUBLE 1. Fan will not start. SUGGESTED REMEDY PROBABLE CAUSE 1. Check the electrical connections at the ceiling cover. 1. Loose electrical connections in the ceiling cover. ! Make sure main power is turned OFF. 2. Fan sounds noisy. 1. Blades not attached to fan. 2.
BP7522 Ideal CF330 02152017.qxp_CF330 2/15/17 11:44 AM Page 27 Emerson Air Comfort Ceiling Fan Limited Warranty What The Limited Warranty Covers: This limited warranty is offered by Air Comfort Products division of Emerson Electric Co.
BP7522 Ideal CF330 02152017.qxp_CF330 2/15/17 11:44 AM Page 28 SERIAL NUMBER: DATE CODE: The serial number of this fan can be found on the nameplate on top of the fan housing. The date code can be found on the carton and on top of the fan housing, stamped in ink on a white label. You should record this data above and keep it in a safe place for future use. Air Comfort Products DIVISION OF EmErSON ElEctrIc cO. 8100 W. Florissant • St.
