SDS

3/7
○ ACGIH TLV
○ OSHA PEL
○ Respiratory protection
○ Eye protection
○ Hand protection
○ Skin protection
- Provide an emergency eye wash station and quick drench shower in the immediate work area.
- Wear appropriate glove.
- Wear appropriate clothing.
- Dust, mist, fume-purifying respiratory protection
- Any air-purifying respirator with a corpuscle filter of high efficiency
- Any respiratory protection with a electromotion fan(for dust, mist, fume-purifying)
- Self-contained breathing apparatus with a corpuscle filter of high efficiency
- For Unknown Concentration or Immediately Dangerous to Life or Health : Any supplied-air respirator with full facepiece and operated in a
pressure-demand or other positive-pressure mode in combination with a separate escape supply. Any self-contained breathing apparatus with a
full facepiece.
- Wear primary eye protection such as splash resistant safety goggles with a secondary protection face shield.
B. Engineering controls
- A system of local and/or general exhaust is recommended to keep employee exposures above the Exposure Limits. Local exhaust ventilation is
generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. The
use of local exhaust ventilation is recommended to control emissions near the source.
C. Personal protective equipment
- Under conditions of frequent use or heavy exposure, Respiratory protection may be needed.
- Respiratory protection is ranked in order from minimum to maximum.
- Consider warning properties before use.
- No open fire.
- Prevent static electricity and keep away from combustible materials or heat sources.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
A. Exposure limits
- Not available
- Not available
- Refer to Engineering controls and personal protective equipment.
- Operators should wear antistatic footwear and clothing.
B. Conditions for safe storage, including any incompatibilities
- Do not use damaged containers.
- Keep in the original container.
- Please pay attention to incompatibilities materials and conditions to avoid.
- Small liquid state spills: Appropriate container for disposal of spilled material collected.
- For disposal of spilled material in appropriate containers collected and clear surface.
7. HANDLING AND STORAGE
A. Precautions for safe handling
- Comply with all applicable laws and regulations for handling
- Get the manual before use.
- If large amounts have been spilled, inform the relevant authorities.
C. Methods and materials for containment and cleaning up
- Large spill : Stay upwind and keep out of low areas. Dike for later disposal.
- Notification to central government, local government. When emissions at least of the standard amount
- Dispose of waste in accordance with local regulation.
- Appropriate container for disposal of spilled material collected.
B. Environmental precautions
- Prevent runoff and contact with waterways, drains or sewers.