Users Manual
CBT002 keyboard operating instructions:
1. Operating steps:
Charging: the MicroUSB charging port is connected to DC5V, the red light of Charge is always on and the full
light is off during charging;
Start-up: Turn the switch to the ON position to the right, and the Power blue light turns on for 3 seconds, then
the light goes out
Pairing: Press the "Connect" key briefly, and the Bluetooth blue light flashes for 3 minutes every second. If it is
not connected, it will go to sleep.
Connection: Click the pairing name "Keyboard", and the indicator light goes off:
Backlight: press the backlight key on the keyboard (the first gear turns on white light, and the RGB key can
switch colors; The backlight of the second gear changes automatically, and the third gear is closed), the
backlight goes out after 1 minute of no operation, and the backlight does not light in the low power
State Keys: Test one by one, and the Caps key is displayed synchronously with the CAPS blue light
Low Power: when the voltage is lower than 3.4V, the alarm prompts, the power blue light flashes once every 1
second, the backlight does not light up, and the keyboard sleeps below 3.0.
Sleep: pairing is not connected or connected for 10 minutes without operation, the sleep light is off, and the
button can wake up
Shutdown: toggle the switch to the left to turn OFF