POP-UP PIT CUSTOMER MANUAL
LIVE LIFE FIRESIDE There’s just something about sitting around a campfire. People unplug and just appreciate the family and friends around them. Some of the best conversations occur while sitting around a campfire, even meals taste better when cooked over an open flame. The campfire is the source of light, a safe zone of warmth and community. Gazing into the flames, we connect to our past. For thousands of years, man has sat around a fire, not just for fun, but for necessity.
ASSEMBLING YOUR POP-UP PIT 1 Open your Pop-Up Pit frame to its fully seated position. 4. 2 Pay close attention to which Ember Guard has the badge, this should be set aside until Step 3. Two Ember Guards should be placed on the frame parallel from one another. Guide the upright pole of the frame through the pre-cut holes in the Ember Guards.
Your Pop-Up Pit may feel ‘stiff ‘ upon first use, this will subside after your first fire. ! 2 Repeat Step 2 with the remaining two Ember Guards. Note that the Ember Guard with the badge should be put on in this step ! Your Pop-Up Pit will come wrapped with straps, keep these as they will aid in storage and packing in the future! 4 3 2 ! If you are having trouble applying the Ember Guards or Fire Mesh WD-40 can be used on the upright poles for lubrication.
DISASSEMBLY AND PACKING 1 Remove the ashes from your pit. This can be done by dumping the pit, by using a shovel, or by removing the Fire Mesh. To remove the Fire Mesh look for the two bottom Ember Guards from Step 2 of the assembly. Simply place hands in the middle of each Ember Guard and pull straight 6. up keeping the Ember Guards parallel to the ground. This should remove all four Ember Guards as well as the Fire Mesh in one unit.
WARNING Ensure your fire is completely extinguished before handling or touching the Pop-Up Pit 2 4 Close the frame of the Pop-Up Pit and use the Ember Guards to form a box around the frame. 3 Place the Fire Mesh with the folded side up on the ground. Place the frame and Ember Guard construction on top of the Fire Mesh and roll together tightly. Repeat for Heat shield if applicable. Using the included straps, strap the top and bottom of the packed Pop-Up Pit to ensure the Fire Mesh does not uncoil.
HEAT SHIELD SETUP 1 Unroll your heat shield, setting aside the included Velcro dots. 3 Wrap the high temperature velcro straps around the locator dots and secure back to the heat shield. 8. 2 There are more than 10 billion outdoor outings every year in the US alone. This can take a huge toll on our environment, be sure to pack out what you pack in and always practice ‘leave no trace’ fires.
ENHANCE YOUR FIRESIDE EXPERIENCE THERMAL PROTECTION GLOVES Protect your hands while working with your campfire or barbecue. Great for any open fires, barbecue grilling or even the home kitchen. GROUND EMBER MAT Use your Fireside Outdoor Ember Mat to keep popping embers and blowing ashes from damaging or polluting the ground around your fire pit or grill.
FiresideOutdoor.
