User manual

Canmore Corporation www.canmore.com.tw
Chapter 4 Geotag Mode (Select and press and hold the right key for
2-3 seconds to enter setup as shown below.)
Press and hold the right key for 2-3 seconds to enter POI setup.
After setting a POI, turn the GPS on .
: The POI set at 14:01 on April 11.
Select New POI: Press and hold the right key for 2-3 seconds to enter
POI setup
Select POI type. Select : Press and hold the right key for 2-3 seconds.
The direction, distance, and altitude of POI set at 15:45 on April 11
from the present location.
The relative position of the POI and current location.
Press and hold the right key for 2-3 seconds to enter Map Scale setup.
Press and hold the left key for 2-3 seconds to return to the previous screen.