Instructions

Aligning the Antenna
smart Mobile Sat System 31

Please refer to the information under the heading Location on page
23 and the tables from page 34 onwards.
Figure 11: Adjusting the inclination angle
 Make the rough adjustment of the inclination angle. Refer to the data in the azimuth and
elevation tables from page 34 onwards.
Your satellite receiver is factory-programmed with all current channels of the most important
satellite positions.
1.
Switch your receiver to the channel position of the satellite, for example, channel 1, ARD
on ASTRA.
2.
Double-check the elevation setting for your location (see the azimuth and elevation ta-
bles on the pages 34 and 35). Correct it where appropriate.
3.
Rotate the dish to its original position to the south.