User manual

2
Midland BTCity/BTEva
Thank you for purchasing the Midland BTCity/BTEva, the wireless
intercom multimedia system for bikers. The Midland BTCity/BTEva
is designed to be tted directly on to your helmet and to be used for
communications with Bluetooth devices like mobile phones, GPS Sat-
Navs and MP3 players. If desired, it can also be paired with another
Midland BTCity/BTEva unit and used as wireless Rider/Pillion Intercom
system or Rider to Rider in bike-to-bike mode, within a maximum range
of 200 meters. The Midland BTCity/BTEva is also supplied with a wired
connection that can be used to connect an iPod/MP3 player or PMR446
transceiver,which will then enable bike-to-bike communications up to a
maximum range of 5 km.
Midland BTCity/BTEva is available in two versions:
 Single BTCity/BTEva Intercom kit with one unit only
 BTCity/BTEva Intercom TWIN with two units
Depending on the model purchased, the package contains the fol-
lowing parts:
BTCity/BTEva
 1 BTCity/BTEva communication unit
 1 audio kit with two stereo speakers, microphone with boom and
wire microphone
 1 plate with bi-adhesive strip to x the unit onto the helmet
 1 clamp to x the unit onto the helmet
 1 stereo audio cable to connect an iPod/ or other models of MP3
players
 1 miniUSB wall-mounting power supply
 Wind Suppressing Foam Microphone Cover, Allen key and Velcro
strip for assembly
BTCity/BTEva TWIN
 2 BTCity/BTEva communication units
 2 audio kits with two stereo speakers, microphone with boom and
wire microphone
› 2 plates with bi-adhesive strip to x the unit onto the helmet
› 2 clamps to x the unit onto the helmet
› 2 stereo audio cables to connect an iPod/ or other models of MP3
players
› 1 miniUSB wall-mounting power supply with double plug
› Wind Suppressing Foam Microphone Cover, Allen key and Velcro
strip for assembly
The units included in the TWIN kit are already paired and can therefo-
re be immediately used in the Intercom mode.
Technical specications of Midland BTCity/BTEva
General:
 Bluetooth ver. 2.0 stereo (Headset/Handsfree/A2DP protocol)
 AGC system automatically controls the volume in relation to
background noise
 Voice (VOX) or manual communications option
 Manual controls to enable: telephone, intercom and wire con-
nection
 Fully waterproof
 Lithium battery with 8 hours talk time
 Recharge time: app. 4 hours
Bluetooth connections:
 Identical device for Rider to Pillion or Bike-to-Bike Intercom mode,
up to a maximum range of 200 meters
 Bluetooth devices
- Mobile phone with MP3 player Stereo (A2DP protocol), GPS (Gar-
min Zumo and TomTom Rider 1 and 2)
- PMR446 transceivers (with built-in or external Bluetooth con-
nection) for group bike-to-bike communications
Wire connections:
 For stereo audio input (iPod/MP3 player)
 For PMR446 transceivers (with optional cable)
Attention: before using BTCity/BTEva for the rst time, remem-
ber to recharge it for at least 5/6 hours.
Attention: Midland BTCity/BTEva is designed to withstand rain
and water. However, if it is raining, always verify that the rub-
ber caps protecting the sockets are fully tted.