User manual

SETUP/PAIRING

Enter SETUP mode Press the Control button for 7 seconds while the unit is o

Exit SETUP mode While in Setup mode, double click the Control button. The Red light will turn o and

the Blue light starts ashing.

Pairing a Phone

While in Setup mode, press the Control button until the LED light ash Red and Blue

alternately

Pairing your BTCity/BTEva with another BTCity/BTEva

device

While in Setup mode, press the Volume + on one unit (the light will ash Red and

Blue alternately), press the Volume- on the other unit (the light will ash Red and

Blue alternately). On a successful pairing, both light turn to Blue for one second.

Reset all paired devices

While in Setup mode, long press he Volume + and he Volume -. On a successful reset,

the Blue light will turn on for two second.

SPECIAL SETUP CONFIGURATION

Change VOX sensitivity or disable it

While in Setup mode, press short the Control and VOL+ buttons (blue light on).

Now, press “Volume +” or “Volume-“ to increase or reduce sensitivity. Double click

the Control button to visualize the VOX status. Go back to the SETUP mode (Red light

always on).

VOX STATUS (Blue light ashing):

Once = VOX disable

Twice = very low sensitivity

3 times = low sensitivity

4 times = medium sensitivity.

5 times = high sensitivity

Wired connection always on

Enabling: In “Setup” mode, press the “Volume+” and “Volume -” buttons for one

second. The blue LED will ash once.

Disabling: Follow the same procedure up described; now the blue LED will ash

twice

CTE International herewith declares that the product complies with the essential requirements of EC Directive 99/05/EC; the declaration of confor-

mity of the device can be consulted onto www.midlandradio.eu