User manual

Using the BTCity/BTEva without helmet

After have xed your BTCity/BTEva on its suitable tool and have inser-

ted the audio kit plug into the central socket, wear your earwarmer

headset as shown in the gure. Please, be sure to have placed the

microphone in the right way, with the white sign oriented towards

your mouth.

Using the BTCity/BTEva with a semi-rigid helmet

To place the BTCity/BTEva into a semi-rigid helmet you should rst of

all remove the little triangular pads, used to cover the ears in most of

helmets on sale, and then put your helmet directly on the earwarmer

headset audio system.

Be sure the BTCity/BTEva unit is placed between the two “V” shapes

strap.

If your helmet is not equipped with the two removable pads, you

could anyway mount your BTCity/BTEva system by using the supplied

Velcro-band. Be sure to x the Velcro-band as shown in the gure.

Now, x the BTCity/BTEva on the Velcro-band. Wear your headset, in-

sert the connection cable of the headset into the BTCity/BTEva device

and wear the helmet.