Data Sheet

ManualsBrandsUnbranded ManualsFraise MowersBullseye NuSurface™ 470/790 Fraise Mowers

Rev. 01/21

* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.

Actual products offered for sale may vary in design, required attachments and safety features. Consult your local Toro Distributor.

NuSurface

™

470/790

The Bullseye NuSurface 470 & 790 are used to fraise mow, flail mow, level, de-thatch,

and renovate turf areas, as well as harvest sprigs. These products are ideal for use

on golf courses and sports fields and are quickly becoming the go-to grass removal

tool for fast and efficient resurfacing projects. It’s rotary action removes material and

transfers it onto a conveyor system for disposal, leaving behind a smooth surface,

immediately ready for sod or seeding. These machines are highly productive and

can be adjusted in small increments for the desired level of aggresiveness. Rather

than swapping out the entire blade mount rotor to change mowing operations, a cost

effective optional verti-cut blade set is easily installed to replace the standard fraise/

flail mowing blade set.

BULLS EYE

™

BULLSEYE NUSURFACE 470, MODEL 46450 BULLSEYE NUSURFACE 790, MODEL 46452

WORKING WIDTH

47” (119 cm) 79” (200 cm)

WORKING DEPTH

Up to 2” (50.8 mm)

TRACTOR REQUIRED

30-40 hp (22.4-29.8 kW) with minimum 1,709 lb. (775 kg) lift capacity 40-50 hp (29.8-37.3 kW) with minimum 3,640 lbs. (1650 kg) lift capacity

VERTI-CUT BLADE SPACING

1, 2, 3 or 4” (2.5, 5, 7.5 or 10 cm)

MAXIMUM WORKING SPEED

1.8 mph (3.0 km/h)

THREE-POINT CONNECTION

Category 1 Category 2

HYDRAULIC CONNECTION

One, double-acting valve Two, double-acting valves

PTO RPM

540 RPM

NUMBER OF BLADES

32 76

STANDARD ITEMS

PTO shaft, fraise/flail mow blade set

WEIGHT

1,367 lbs. (620 kg) 2,908 lbs. (1319 kg)

DIMENSIONS

Width 73” (185.4 cm) Height 87” (220.9 cm) Length 62” (157.4 cm)

With conveyor in transport/storage position.

Width 97” (246.3 cm) Height 45” (114.3 cm) Length 72” (182.8 cm)

With conveyor in transport/storage position.

WARRANTY

One-year limited warranty. Refer to the Operator’s Manual for further details.

BULLSEYE NUSURFACE 470 – ACCESSORIES BULLSEYE NUSURFACE 790 – ACCESSORIES

SET OF FRAISE/FLAIL BLADES

Set of 32 blades. Part #144-7782 Set of 76 blades. Part #144-7784

SET OF VERTICUT BLADES

Set of 32 blades for 1” (2.5 cm) spacing. Part# 144-7783 Set of 76 blades for 1” (2.5 cm) spacing. Part# 144-7785