Data Sheet

Rev. 01/21

* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.

Actual products offered for sale may vary in design, required attachments and safety features. Consult your local Toro Distributor.

FieldCombo

™

770

To brush, loosen and decompact the hardest infill, the Bullseye FieldCombo 770

is equipped with a variety of customizable tools to meet your needs. Two rows

of steel spring tines gently lift and break up compacted areas while effectively

mixing and softening any infill material. Used separately with spring tines

raised, or in combination, the rear poly-brushes straighten and lift the turf

fibers leaving them plush and upright for an improved playing surface and an

exceptional field appearance. An optional magnet adds to its functionality and

quickly installed drawbar kit allows even more tow vehicle options.

BULLSEYE FIELDCOMBO 770, MODEL 46420

WORKING WIDTH

77” (195.5 cm)

DECOMPACTING DEPTH

0 - 1.38” (0 - 35 mm), infinitely adjustable

VEHICLE REQUIREMENT

Tractor with minimum 18 hp (13.4 kw), a category 1, 3-point hitch or

Workman MDX utility vehicle or equivalent, using drawbar hitch kit, model 46421

NUMBER OF SPRING TINES

Two rows of 66 (132 total)

SPRING TINE SPACING

0.59” (15 mm)

WEIGHT

495 lbs. (225 kg)

DIMENSIONS

Width 85” (215.9 cm) Height 35” (88.9 cm) Length 78.5” (199.3 cm)

WARRANTY

One-year limited warranty. Refer to the Operator’s Manual for further details.

BULLSEYE FIELDCOMBO 770 ACESSORIES

DRAWBAR HITCH KIT

Allows operation with a Workman MDX utility vehicle or equivalent, model 46421

MAGNET KIT

Mounts directly behind spring the tines for removal of metal debris, model 46422

BULLS EYE

™