Use and Care Manual

9
Bullyliner is a registered Trademark All rights reserved.
F. Using BULLY HVLP Spray Gun Properly (Cont.)
4. When surface becomes tacky, spray second coat. Extreme climatic conditions of heat, humidity and
cold The first coat should be dry to the touch within one hour and cured in 12-24 hours.
5. The more time between the final coat of BULLYLINER and the topcoat, the quicker BULLYLINER
will harden for heavy use. For best adhesion, apply topcoat to BULLYLINER surface within 24 hours.
NOTE: TWO COATS OF BULLYLINER ARE REQUIRED FOR ADEQUATE COVERAGE.
6. After second coat is dry to the touch, check for any missed
spots and touch up.
7. Install tailgate and hardware.
8. The truck bed will be ready for light use in 12-24 hours.
9. Clean all tools using water before BULLYLINER has dried.
G. Bully Pressure-Pot Spray System
Compressor:
1.6 gallon tank compressor delivers
3.80 CFM at 40psi
a 20 gallon compressor
40psi = 6 CFM