LCD MONITOR User manual
IMPORTANT SAFETY INFORMATION Table of contents ENVIRONMENT Important safety information In The Box Connections Rear interface Control Layout How to connect your monitor On-Screen Display (OSD) Operation AV Input Configuration HDMI Input Configuration VGA Input Configuration 2 4 4 4 5 5 7 7 9 12 • • • Do not install the monitor outdoors or in any hostile environment. To prevent fire or electric shock, do not expose monitor to rain or moisture.
IN THE BOX USING A WALL MOUNT Caution: Any wall mount must bear a minimum of 5x the monitor’s net weight to mount safely. The stand must be removed first before mounting this way. 1. Place the monitor face down on a surface that is soft, yet strong enough to hold the monitor. 2. Use a screwdriver to remove the screws from the four holes on each side of the bottom of the monitor’s base. 3. Make sure all cables are already connected to the monitor. 4.
CONTROL LAYOUT The control buttons are located on the right hand rear side of the monitor. 5keys series (19.5”,21.5”) SOURCE - Connect power to the monitor and video source, and switch on. Using the SOURCE button, press repeatedly until either ‘AV’ (depending on the connection used) is highlighted on the display at the top of the monitor's screen, and press ‘+’ to select. 2. Connecting using HDMI + MENU POWER 7keys series (23.
PICTURE MODE: 2. Use the ‘＋’ or ‘－’ buttons to select the required menu item, then press the ‘SOURCE’ button to select the Sub menu. 2. Select defaults or save user setting. ( User/Standard/Soft/Vivid) OSD 3. Continue to use the ‘SOURCE’ button to highlight the required field, then press ‘＋’ or ‘－’ to adjust the setting. 4. Press the ‘MENU’ button to return to previous menu. 5. Press the ‘MENU’ button again to exit the OSD Menu completely. 6. N.B. To Lock or Unlock OSD settings after set up.
BASS: TREBLE: BALANCE: SOUND MODE: AVC: (0-100) (0-100) (-50 to +50) Set user or preset audio configurations. (User/Standard/Movie/Music) (ON/OFF) Automatic Volume Control COLOR TEMP: USER - R: USER - G: USER - B: 2. Select color temperature preset. Set RED color level. Set GREEN color level. Set BLUE color level. OSD HDMI - Input Configuration 1. Picture LANGUAGE: CONTRAST: BRIGHTNESS: (0–100) Set the difference between the light and dark areas of the picture.
1. HSTART: HSIZE: VSTART: VSIZE: 4. Set left alignment point of image. Set horizontal size of image. Set lower alignment point of image. Set vertical size of image. Picture CONTRAST: BRIGHTNESS: COLOR TEMP: (0–100) Set the difference between the light and dark areas of the picture. (0–100) Set how bright the display is. Select the color temperature Menu. COLOR TEMP: USER - R: USER - G: USER - B: Select color temperature preset. Set RED color level. Set GREEN color level. Set BLUE color level.
PHASE: AUTO ADJUST: 4. LANGUAGE: H-POSITION: V-POSITION: DURATION: BACKLIGHT: MEM-RECALL: 3. Audio Select preferred language for OSD. (En/Ch/Ger/Fr/Sp/It/Pt/Pl/Ru) (0-100) Set the horizontal position of the OSD. (0-100) Set the vertical position of the OSD. (5-60) Set seconds for the OSD to automatically close. Set power level in use by backlight (HIGH/MID/LOW) Restore all factory defaults. Geometry BASS: TREBLE: BALANCE: SOUND MODE: AVC: H-POSITION: V-POSITION: CLOCK: 13.
