Installation Guide

3
Installation and Operation Guide
www.blueairfse.com
** Four screws (M6) are provided per each caster(R834F-200) of table unit.
** Keys for door locks are in manual packet. (Reach-ins only)
Models
Caster Box
Shelf Clip
Shelf
Quantity of casters
Quantity of clips
Quantity of Shelves
BSR/BSF23,23T,23G-HC R834E-130 4 R8429-060 1set(16ea) R836A-070 1set(4ea)
BSR/BSF49,49T,49G-HC R834E-130 4 R8429-080 1set(32ea) R836A-050 1set(8ea)
BSR/BSF72,72T-HC R834E-140 6 R835A-020 1set(48ea) R836A-060 1set(12ea)
BLUR/BLUF28-HC R834F-200 4 R835A-110 1set(10ea) R834G-080 1set(2ea)
BLPT/BLMT28-HC R834F-200 4 R835A-110 1set(10ea) R834G-080 1set(2ea)
BLUR/BLUF36-HC R834F-200 4 R835A-130 1set(18ea) R834G-090 1set(4ea)
BLPT/BLMT36-HC R834F-200 4 R835A-130 1set(18ea) R834G-090 1set(4ea)
BLUR/BLUF48-HC R834F-200 4 R835A-130 1set(18ea) R834G-100
1set(4ea)
BLPT/BLMT48-HC R834F-200 4 R835A-130 1set(18ea) R834G-100
1set(4ea)
BLUR/BLUF60-HC R834F-200 4 R835A-130 1set(18ea) R834G-110
1set(4ea)
BLPT/BLMT60-HC R834F-200 4 R835A-130 1set(18ea) R834G-110
1set(4ea)
BLUR72-HC R834F-200 4 R835A-150 1set(26ea) R834G-120 1set(6ea)
BLPT/BLMT72-HC R834F-200 4 R835A-150 1set(26ea) R834G-120 1set(6ea)
BLUR/BLPT/BLMT/28-D2-HC R834F-200 4 n/a n/a
BLUR/BLPT/BLMT/48-D4-HC R834F-200 4 n/a n/a
BLUR/BLPT/BLMT/60-D4-HC R834F-200 4 n/a n/a
BLUR/BLPT/BLMT/72-D6-HC R834F-200 4 n/a n/a
2. Installation
Before you start to install your Blue Air unit, carefully
inspect it for freight damage. If damage is discovered,
immediately file a claim with the delivery freight carrier.
Blue Air is not responsible for damage incurred during
shipment.
To ensure that your unit works properly from the first
day, it must be installed properly. We highly
recommend a trained refrigeration mechanic and
electrician install your Blue Air equipment. The cost of
a professional installation is money well spent.
Tools Required.
• Wrench(included with casters), Figure 2
• Adjustable Wrench
• Screwdriver
• Leveler
Uncrating
The following procedure is recommended for uncrating
the unit. Move your unit as close to the final location as
possible before uncrating.
2) Check all Part accessories listed are included with the appliance :
1) Remove the wooden pallet :
Unscrew the bolts shown in Figure 1 (Reach-in 4-
M13 Bolts and Undercounter 2-M6 Bolts)
Figure 1
Figure 2