Instructions / Assembly

Assembly Instructions

1- Please unpack all components and check quantity against list above

2- Arrange components as shown in main diagram

3- Position the Headboard and Footboard as shown

4- Attach side rails into the Headboard and Footboard using two bolts on each end and on each side

5- Attach the center leg to the center rail using supplied bolts

6- attach the center rail to the headboard and footboard using supplied bolts

7- Please attach center plastic connectors to the metal center rail

8- Please place the bent wood slats into the center plastic connector and then attach the plastic end cap to the other

end of the slat.

9- Firmly push the plastic end cap into the metal side rail

10- Continue Steps 8-9 until all slats are completed.

Parts and Hardware

1. Headboard

2. Side Rail

3. Footboard

4. Leg 4x

5. Bolt (M8 x 25mm)

6. Spring Washer

7. Washer

x21

x42

9. Bed Slats

10. End Cap

8 . Bolt (M4 x 50mm)

11. Allen Key(M5)

METRO BED

SINGLE SIZE

x1 12. Allen Key(M3)