User Manual

Toro App Instructions for Bluetooth

Hose-End Timer

Pairing your Smart Phone or Tablet with the Toro Controller

Compatible with Bluetooth 4.1 devices (minimum required iOS 8 or Android V4.4).

Pairing is required only once. On subsequent operations of the app, the app will sync automatically

with the controller and display the paired controller status screen.

1. Insert an alkaline 9V battery into the controller.

For detailed instructions, see your controller model user guide.

2. Download and install the Toro BT app from

the Apple App store or the Android Google Play store.

Or, scan the bar code on the controller package to download

the app.

3. After the app is installed, tap to launch the app.

If the app prompts you to turn on Bluetooth,

do so and tap OK to conrm.

On the app, press Scan for controllers.

After a moment, the app will display the found

controllers.

• Tap the Bluetooth icon and enter the pairing code

(four digits) that is displayed on the controller

display. The code is displayed for 10 seconds. If

you don’t enter the code in time, simply press the

Bluetooth icon again.

• Tap Send to continue.The controller and the

phone are now paired. The Welcome screen

shows the controller is paired.

The status screen displays the controller status

and is your access point to the app activities.

Controller Settings :

To access Settings, be at the status screen. Press the 3 vertical dots ( ) then the Settings icon ( ).

Change Name

Tap into the Edit name eld and enter / edit a new name. Press Save.

Change Photo

It is possible to change the default icon for each

hose-end controller. Simply press the controller icon

and opt to either Take a photo or Choose from les.

• Take photo: Take the photo.

Use the photo or retake as desired.

• Choose from les: Select the image from your

mobile device. Choose the photo.

The icon for the controller changes to the selected photo.

The Bluetooth® word mark is a registered trademark owned by the Bluetooth SIG, Inc. Any use of such marks by The Toro Company is under

license. Other trademarks and trade names are those of their respective owners.

The status screen.

PAGE 1
Toro App Instructions for Bluetooth® Hose-End Timer Pairing your Smart Phone or Tablet with the Toro Controller Compatible with Bluetooth 4.1 devices (minimum required iOS 8 or Android V4.4). Pairing is required only once. On subsequent operations of the app, the app will sync automatically with the controller and display the paired controller status screen. 1. Insert an alkaline 9V battery into the controller. For detailed instructions, see your controller model user guide. 2.
PAGE 2
Suspend Controller To suspend irrigation operation in the event of rain, fog, etc. without deleting the existing program, do the following: 1. Tap “Suspend Irrigation” slider to Yes. 2. Set the number of inactive days, or slide to “Unlimited”. Press Save then Save again. 3. The status screen displays Device not active with the “Not active until...” end date. Delete Controller • In Settings, press the “Delete Controller” slider to Yes. Press Save and confirm deletion.