Warranty

LED GROW LIGHT

1 PACK BLGL-Al-A60-20-A66-Al

INSTALLATION GUIDE

WARNING:

These products may represent a possible shock or fire hazard if improperly installed. Products should be installed in accordance

to the manual, current electrical codes and/or the current National Electric Code (NEC).

PLANNING YOUR INSTALLATION

PACKAGE CONTENTS

Grow light (1) 5ft plug-in power cord (1) Assistive Te mpl a te (1)

HARDWARE INCLUDED

TOOLS TYPICALLY USED FOR INSTALLATION

Installation

1. Remove the clear wrap on Light fixture before installation.

2. Choose your desired installation location.

3. On the Assistive Template provided, make two small holes at marks A and B (see below illustration).

PAGE 1
LED GROW LIGHT 1 PACK BLGL-Al-A60-20-A66-Al INSTALLATION GUIDE WARNING: These products may represent a possible shock or fire hazard if improperly installed. Products should be installed in accordance to the manual, current electrical codes and/or the current National Electric Code (NEC). PLANNING YOUR INSTALLATION PACKAGE CONTENTS Grow light (1) 5ft plug-in power cord (1) Assistive Template (1) HARDWARE INCLUDED DD TOOLS TYPICALLY USED FOR INSTALLATION Installation 1.
PAGE 2
LED GROW LIGHT 4. Tape Assistive Template to desired installation location (see below illustration; use this step if mounting directly to a hard surface vs using hooks and hanging cables). 5. Drill two small holes at the marks A and B at your desired installation location (note distance between the holes). 6. Remove Assistive Template, then screw hooks into the holes at your desired installation location (Figure A). 7. Hook the hanging cable to end-cap. (Figure B) 8. Hang cable to ceiling hook.