Specification

9
Plugmold 2400 Series Steel Part Numbering System
COLOR:
Ivory = 99IV
RACEWAY:
2400 = 24
WIRING CONFIGURATION:
GB = GB
GBA = GBA
2 4
G B A
LENGTH:
36" [915mm] = 3
60" [1.5m] = 5
72" [1.8m] = 6
5
CENTER DISTANCE:
6" [152mm] = 6
12" [305mm] = 12
18" [457mm] = 18
1 2
9 9IV
2400 Series Steel Plugmold Series w/Simplex Receptacle – Example: 24GBA512
WIRING CONFIGURATION:
GBX = GBX
GBA = GBA
IGX = IGX
RACEWAY:
2400 = 24S
24S
G B X
CENTER DISTANCE:
12" [305mm] = 12
18" [457mm] = 18
24" [610mm] = 24
1 8
2400 Series Steel Plugmold Series w/Duplex Receptacle – Example: 24SGBX3618I
LENGTH:
36" [915mm] = 36
60" [1.5m] = 60
72" [1.8m] = 72
3 6
COLOR:
Ivory = V
V
NOTE: Not all combinations of color, wiring configurations, length, and center distance are available as standard
products. For additional information, contact Wiremold Technical Support at 1-800-621-0049.
NO. OF CONDUCTORS
CABLE WIRE SIZE O.D. (40% FILL)
TYPE THHN/THWN Inches [mm] 2400
POWER WIRING 10 AWG 0.166 [4.2] 26
WITHOUT DEVICES 12 AWG 0.130 [3.3] 41
14 AWG 0.111 [2.8] 57
POWER WIRING 8 AWG 0.218 [5.5] 2
WITH DEVICES 10 AWG 0.153 [3.9] 6
(Plugmold Series) 12 AWG 0.122 [3.1] 10
14 AWG 0.105 [2.7] –
2400 Series Plugmold Wire Fill Capacities for Power
NOTE: Wire capacity limited to maximum of seven conductors due to .025" [.6mm] material
thickness of cover. Including one hot, neutral, and ground wire from the receptacle.
1 29/32"
[48mm]
7/8"
[22.2mm]
NOTE: Color codes: “V” for Ivory ScuffCoat
™
finish. Receptacle colors match extrusion colors except for isolated ground versions which have orange
receptacles.
* All 2400 Series Plugmold products include two (2) 2410B Blank End Fittings and one (1) 2401 Base Coupling unless otherwise indicated in the
product desciption.