FAQ

Well Done 1 Home Kits, LLC

Frequently Asked Questions

What type of steel do you use?

All of our steel is from the USA and is G90 galvanized for the highest protection.

Galvanized steel refers to a process that coasts mild steel with a layer of zinc to

provide good corrosion resistance. Our steel supply offers G90 Galvanized steel,

meaning that the zinc coating is a minimum of 0.90 ounces per square foot

(coating both sides of the sheet).

Depending on your requirements for your county, building codes, and

environmental needs, the gauge of the steel and engineering may change.

What upgrades do Well Done 1 offer?

Well Done 1 offers many upgrade options. Each upgrade will have a price

increase based on the model being purchased. Simply purchase your model

with Home Depot and Contact Us to purchase your upgrades.

1. Location Upgrades: Seismic, high wind, and snow engineering upgrades are

available and will be added to your frame purchase based on location

requirements. Our frames can be upgraded to withstand winds up to 175+

MPH and snow loads up to 120 lbs. per sq.ft.

2. Foundation Upgrades: The Flooring System will vary depending on your

requirements. Based on the Buyer’s property, a standard concrete foundation

may not be possible. Therefore, a raised foundation may be necessary and a

flooring system may be required

3. Loft Upgrades: Based on your city’s height restriction, you may be limited to

adding a Loft to your model. Some of our models are predesigned to include

a loft. When considering adding a loft to your model, identifying your height

restrictions will be necessary

4. Garage Upgrades: Adding a Garage to your model will be calculated

differently than livable square footage.

What is the Well Done 1 Approach?

During the 15 Minute Phone Call with a Well Done 1 Associate, we follow the

process below for all new Clients:

1. Appointment with a Well Done 1 Associate, per scheduled 15 Minute Phone

Call

2. Identify cost per square foot x home size within budget