Datasheet

BEP-510
120 Watt
100 Watt continuous fanless power!
Operating temperature up to +70 °C
Efficiency up to 84 %
Input voltage 90…264 V AC, active PFC
Input frequency 47…63 Hz
Input current 2 A (115 V AC) / 1 A (230 V AC)
Inrush current 30 A (115 V AC) / 70 A (230 V AC)
Efficiency ≥80 % (at max load and 115 V AC)
Hold up time >41 ms at 115 V AC and max load
Power-Good-Signal Switch on delay 100…550 ms, Switch off delay 1 ms
Protection Short circuit protection: at each output, switch off
Overload protection: 110…160 %, switch off
Overvoltage protection: switch off, +3.3 V (3.6…4.3 V), +5 V (5.6…6.5 V), +12 V (13.2…15 V)
Overtemperature protection: switch off
Earth leakage current <3.5 mA
Safety / EMC CE, UL 60950-1, TÜV: EN 60950-1
Temperature Operating: -10…+70 °C / Storage -20…+80 °C
Derating See diagram
MTBF 202 000 h at +50 °C without fan according to MIL-HDBK-217F
Max. operating altitude 2000 m
Humidity Operating: 10…85 % RH, non-condensing / Storage: 10…90 % RH, non-condensing
Dimensions (W x D x H) 83.8 x 165 x 40 mm ±0.4 mm
Weight (net) 0.6 kg
The ATX PC power supply BEP-510 is designed for the installation
into fanlessly operating computers for industrial applications. Its
innovative circuit design focuses on a high degree of efficiency,
which is 84 % at nominal load. The DC cable harness is firmly con-
nected to the unit. High-quality components guarantee a long
service life. For applications with DC input the related model
BEP-510C is available.
Article Output Output current Load Ripple &
No. voltage min max regulation Noise
BEP-510 +3.3 V 0 A 12 A ±5 % 50 mV
+5 V 0 A 14 A ±5 % 50 mV
+12 V 0.1 A 8 A ±5 % 120 mV
-12 V 0 A 0.5 A ±10 % 120 mV
+5 V
sb
0 A 1.5 A ±5 % 50 mV
5 °C 10 °C 15 °C 20 °C 25 °C 30 °C 35 °C 40 °C 45 °C 50 °C
100 W
86 W
Fanless operation from 0…+50 °C
10 °C 20 °C 30 °C 40 °C 50 °C 60 °C 70 °C
100 %
75 %
50 %
25 %
0 %
Derating from +50…+70 °C
Supplementary data for derating from +50…+70 °C
Fanless 86 W Load at +3.3 V / +5 V fanless (50 W)
120 W with 20 CFM fan Load at +3.3 V / +5 V with 20 CFM fan (70 W)
Output current per channel
Output power at +3.3 V, +5 V, +12 V and -12 V is 93 W (without fan). 100 W power can be supplied without fan, and
120 W full power using a 20 CFM fan. As a power component this PSU is for assembly purposes only and must not
be operated in unassembled condition. The final assembly has to comply with the valid EMC and safety standards.
Industrial PC power supplies
AC input
Te c h n i c a l d a t a
Bicker Elektronik GmbH | 86609 Donauwörth | Germany
Tel. [phone] | [e-mail] | www.bicker.de
Extended
Extended
Delivery
5
YEARS
Delivery
5
YEARS
Fanless
Fanless
Eco
Eco
Operation
Operation