Product Manual

22
Fig. 14: Location of fuses for BALLYPAL45N
d. Checking electrical fuses
Remove the main cover. The fuses are located according to Fig. 14; the size is according to table 7.
10. TROUBLE SHOOTING
• If the truck has malfunctions follow the instructions, mentioned in chapter 6.
Table 8: Trouble shooting
TROUBLE
CAUSE
REPAIR
Load can’t be
lifted
Load weight too high
Lift only the max. capacity, mentioned on the ID-plate
Battery low power
Charge the battery
Lifting contactor failure
Check and replace
Hydraulic oil level too
low
Check and eventually refill hydraulic oil
Oil leakage
Repair the sealing of the cylinder
Oil leakage
from air
breathing
Excessive quantity of oil.
Reduce oil quantity.
Truck not
starts
operating
Battery is charging
Charge the battery completely and then remove the
main power plug form the electrical socket.
Battery not connected
Connect the battery correctly
Fuse faulty
Check and eventually replace fuses
Low battery
Charge the battery
Table 7: Size of the fuses
Rate
FU 1
10A
FU 01
70A
Fig. 15 Location of fuses for BALLYPAL33N