Product Manual

18
Table 5: ChargerPTE45N
9. REGULAR MAINTENANCE
• Only qualified and trained personnel are allowed to do maintenance on this truck.
• Before maintaining, remove the load from the forks and lower the forks to the
lowest position.
• If you need to lift the truck, follow chapter 4b by using designated lashing or jacking
equipment. Before working, put safety devices (for instance designated lift jacks,
wedges or wooden blocks) under the truck to protect against accidental lowering,
movement or slipping.
• Please pay attention by maintain the tiller arm. The gas pressure spring is
pre-loaded by compression, carelessness can cause injury.
• Use approved and from your dealer released original spare parts.
• Please consider that oil leakage of hydraulic fluid can cause failures and accidents.
• It is allowed to adjust the pressure valve only from trained service technicians.
If you need to change the wheels, please follow the instructions above. The castors must
be round and they should have no abnormal abrasion.
Check the items emphasized maintenance checklist.
a. Maintenance checklist
Table 6: Maintenance checklist
Interval(Month)
DZL2420SS02
24V5A
100Vac -240Vac～2.0A MAX
29.4V 5.0A
DZL300SS02
24V8A
180Vac -240Vac～3.0A MAX
29.4V 8.0A
SSLC300V29
24V8A（EU）
180Vac -240Vac～3.0A MAX
29.4V 8.0A
SSLC300V29
24V8A（US）
108Vac -132Vac～5.0A MAX
29.4V 8.0A
QQE288-10CH109
24V12A
100Vac -240Vac～6.0A MAX
29.4V 12.0A
Model
Specification
Input
Output
DZL500SS02
48V9A
180Vac -240Vac ～2.0A MAX
54.6V 9.0A
SSLC500V48
48V9A（US）
100Vac -132Vac ～5.0A MAX
54.6V 9.0A
SSLC500V48
48V9A（EU）
180Vac -240Vac ～2.0A MAX
54.6V 9.0A