Product Manual

16
IT IS ONLY ALLOWED TO USE LITHIUM BATTERIES.
PLEASE CONSIDER THE MAXIMUM OPERATING TEMPERATURE OF THE
BATTERIES.
a. Replacement
Park the truck securely and press emergency switch (5). Hold the battery grip with one finger pull out the
lock, and then take out the battery vertically. The installation is in the reverse order.
b. Battery indicator
Hour meter
An alpha-numeric liquid crystal display is fitted in the centre of the unit that shows the hours worked. The
display is backlight (the backlight is normally lighted).
Alarms
The same display can also indicate the alarm state, showing a code corresponding to the type of alarm.
Battery State of charge
The battery's state of charge indication is integrated in the LCD display; it is shown by ten notches. Each
notch represent the 10% of the battery charge. As the battery becomes discharged, the notches turn off
progressively, one after the other, in proportion to the value of the residual battery charge. This value,
sent to the MDI-CAN by the controller via CAN-BUS. When BATTERY LOW alarm appears on the
controller, the battery symbol which is under the notches blinks.
Turtle Symbol:
It is normally off, when it appears (fixed) it shows activation of the “soft” mode of the truck, in which
maximum speed and acceleration are reduced.
Monkey Wrench Symbol:
Fig. 10: Battery replacement
Fig. 11:Battery discharge indicator
Battery discharged
Battery charged