Installation Guide

If you’ve bypassed your internal doorbell and still
desire an audible indoor chime, consider adding
a Ring Chime or Chime Pro to your system.
Learn more at: ring.com/chime-pro
I’m Having Trouble Completing the In-app Setup
When the in-app setup fails, the light on the front of your Ring
Doorbell indicates the issue.
Top Flashing White – Your Wi-Fi password was entered
incorrectly. Select your Wi-Fi network in your phone
settings, choose the option to forget it, then connect to
it again to confirm that you’re using the correct
password during setup.
Right Flashing White – Your Ring Doorbell may be too
far from your router to get a decent signal. You may
want to install your Wi-Fi router closer to your Ring
Doorbell, or add a Ring Chime Pro to boost Wi-Fi signal.
Left Flashing White – There may be an issue with your
internet connection. Unplug your modem (and Wi-Fi
router, if they are separate) for 40 seconds, then
reconnect power and repeat the setup process.
Spinning White – Your Ring Doorbell is in setup mode.
Follow the instructions in the Ring app to continue. If the
in-app setup does not complete, repeat setup and note
the resulting pattern.
5. Troubleshooting