Installation Guide

2. Install your Ring Video Doorbell Pro
Everything needed for the installation is in the box.
Screwdriver - Use the Phillips end for the
mounting screws and star-shaped end for the
security screw.
Drill Bit and Anchors - Use the drill bit with a power
drill to drill holes for the (optional) anchors if
installing on concrete, stucco, or brick.
Mounting Screws - Use two to mount your Ring
Doorbell. Use the longer screws if you’re installing
with the optional Retrofit Kit.
Security Screws - Use one to secure the faceplate.
Wire Extenders and Wire Nuts - Use to extend
existing doorbell wires (if needed).
Retrofit Kit - Use when upgrading from a battery-
powered Ring Video Doorbell, or as additional trim
when upgrading from a conventional doorbell.
2. Install your Ring Video Doorbell Pro