Installation Guide

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 6/30/15 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2015 by Bobrick Washroom Equipment, Inc.
Technical Data
2-3/4''
70mm
Finish Face of Wall
S
S
3-7/16''
85mm
1-3/8''
35mm
Recommended Mounting Height Off Floor
Accessible Design
38'' to 40'' 965 to 1015mm
MATERIALS:
Hook and Flange — One-piece brass casting with satin nickel-plated finish. Withstands 300-lb (136-kg) downward pull if
properly installed.
INSTALLATION:
Mount unit on wall with three sheet-metal screws, furnished by manufacturer, at points indicated by an S. For plaster or dry
wall construction, provide concealed backing to comply with local building codes, then secure hook with screws furnished. For
other wall surfaces, provide fiber plugs or expansion shields for use with screws furnished, or provide toggle bolts or expansion
bolts.
SPECIFICATION:
Heavy-duty robe hook shall be one-piece brass casting with satin nickel-plated finish. Hook shall withstand 300-lb (136-kg)
downward pull when properly installed.
Heavy-Duty Robe Hook shall be Model B-211 of Bobrick Washroom Equipment, Inc., Clifton Park, New York;
Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario;
Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.
B-211
HEAVY-DUTY
CLOTHES HOOK
with Exposed Mounting