Use and Care Manual

5
AQUASURE FORTITUDE PRO SERIES
STEP 2. Shutting off the Main Water Supply Valve
1. Locate the main water supply valve of the house and turn off completely by turning the
shut-off handle clockwise.
2. Test to see if the water is completely shut off by turning on the faucet in the cold water
position. If the cold water cannot be shut off, please contact your local plumber to x the
valve before begin installing the system.
IN
STEP 1. Checking the direction of the water ow
1. Make the water ow to make sure they are going from left to right or right to left.
2. Reassemble the mounting bracket for the pleated sediment lter if the direction is
oppsite of where the mounting bracket is facing.
3. Make sure the ow fo the water goes into the opening that indicated “IN” on top of the
CAP and exit from the opening that indicated “OUT”.
IN