Instructions / Assembly

Recycled Post
2" Tamper-Resistant Screw
Aria Instrument Assembly
INSTRUMENT TO POST INSTALLATION PROCEDURES
Step 1:
The Steel Post options do not require assembling the instrument to the post, as the post and instrument are one unit. Refer back to the final
steps on the previous sheets if this applies to you. If mounting to a recycled post, follow the instructions below.
Step 2:
With two people, situate the instrument onto the post. Predrill 5/32" pilot holes into the posts through the existing holes on the instrument. Fasten the
instrument to the post with the provided 2" tamper-resistant screws and security driver.
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
FREENOTES HARMONY PARK. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
FREENOTES HARMONY PARK IS
PROHIBITED.
FREENOTES HARMONY PARK
194 BODO DRIVE, UNIT F
DURANGO CO 81303
TEL: [phone]
FAX: [phone]
EMAIL: [e-mail]
WWW.FREENOTESHARMONYPARK.COM
SHEET 5 OF 5
SCALE: 1:6
PRODUCT SHEET / INSTALLATION GUIDE
ARIA 2016