Instructions / Assembly

Frost Depth
Finished Height
Post Length
10" Excavated
Hole W/Concrete
Fill
RECYCLED AND STEEL POST IN-GROUND INSTALLATION PROCEDURES
Step 1:
Excavate one 10" diameter hole, 36" deep at the installation location. Contractor can modify post to desired height.
Post Length = Frost Depth (36" Recommended) + Finished Height (Refer to Height Guideline)
Step 2:
Lower the post into the excavated hole.
Step 3:
Refer to sheet 5 for installation of instrument to post.
( The Steel In-Ground option does not require assembling the instrument to
the post, as the post and instrument are one unit )
Step 4:
Verify the correct placement, levelness, plumbness, and finished height
of the instrument. Also check for sufficient clearance around the instrument.
A 36" radius is recommended around the instrument for wheelchair accessibility,
however this is not required for instrument function. Instrument may be installed
next to a wall or in a variety of different configurations.
Step 5:
Last pour concrete around the post. It is recommended to brace the instrument
to hold it rigid while the concrete cures. Leave to set according to the concrete
manufacturers guidelines. Approximately (2) 80lb. bags will be needed.
FINISHED HEIGHT GUIDELINE
Ages 3-5, 22"
Ages 5-7, 27"
Ages 7-11, 32"
Adult, 36"
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
FREENOTES HARMONY PARK. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
FREENOTES HARMONY PARK IS
PROHIBITED.
FREENOTES HARMONY PARK
194 BODO DRIVE, UNIT F
DURANGO CO 81303
TEL: [phone]
FAX: [phone]
EMAIL: [e-mail]
WWW.FREENOTESHARMONYPARK.COM
SHEET 3 OF 5
SCALE: 1:12
PRODUCT SHEET / INSTALLATION GUIDE
ARIA 2016