Instructions / Assembly

STEP 5

STEP 6

Following the pattern below and beginning with the 6th band, continue to

place the elastic bands around the frame in a clockwise direction until all 20

bands are used. It will get tight as you near the end of attaching the stretch

bands and wearing gloves will come in handy at this point to prevent blisters.

Make sure the balls on the elastic bands are located on the underside of the

trampoline! After all the elastics have been placed, if the mat is not in the

middle of the frame, spend time adjusting the stretch bands.

Elastic with Ball (x20)

Pad with Net (x1)

Lay the pad with net (7) on the frame. There are premade slits in the pad.

Adjust the position of the pad so that the premade slits are directly above

the legs. Insert the top of the legs into the slits of the spring pad.

Note: The slits in the spring pad are located in the seams. To ﬁnd the holes,

pull gently at the seam.

Slit in the seam

6th

7th

8th

9th

10th

11th

12th

13th

14th

15th