Installation Guide

LINER PLACEMENT

Only the liner set that has been certied with this

unit shall be used.

STEP 1

STEP 2 & 3

NOTE: When properly installed the side panel is

designed to hold the top panel in place.

STEP 2

STEP 3

STEP 4

LOG PLACEMENT

CAUTION:

DO NOT PLACE LOGS DIRECTLY OVER BURNER

PORT HOLES. IMPROPER LOG PLACEMENT

MAY AFFECT FLAME APPEARANCE AND

CAUSE EXCESSIVE SOOT TO BUILD UPON THE

LOGS AND GLASS.

If converting to LP (propane) gas, complete the

conversion before installing the log set. Follow the

conversion instructions included with the kit.

Only the log set that has been certied with this

unit shall be used. NOTE: This unit should not be

burned without the approved logs, surrounds,

and liners properly installed. Use without the logs,

surrounds, and liners properly installed could cause

damage to the appliance.

STEP 1

STEP 2

STOVE INSTALLATION