User Manual

!
12. Set up profiles & PIDs!
Go to the PID Tuning tab and select profile 2 (you're leaving profile 1 in the default
settings in case it works for you). For a 400 sized quad you may wish to change profile 2
in accordance with my settings (remember to press the save button on each page - each
profile will have to have the CLI commands entered again separately): !
!
*Note the RC Rate, RC Expo, Pitch & Roll Rate and Yaw Rate. (Remember to press the
save button on each page for each profile. For each profile, you will have to set up again
the Receiver tab, and the Auxilliary Configuration tab.)!
!
!
!
!
!
!
!
!
!
6
EDITION 4
ACRO NAZE32 GUIDE - DLEARNT