User Manual

———-!
You may wish to change your ‘map’ [Aileron, Elevator, Throttle, Rudder, Aux 1, etc]
depending on your receiver setup.!
!
If you use a Futaba radio see para. 5 on page 11 of timecop’s manual!
!
See mochaboy’s video if you want to know more.!
!
Click on the Initial Setup tab!
8. Fix the Naze32 to your quad!
And hook your receiver and ESCs up to the board. !
!
!
!
!
For ESCs, only one ESC needs to have its signal, ground and
voltage wires connected to the board. All others need only
their signal wires connected.!
!
!
!
!
!
4
EDITION 4
ACRO NAZE32 GUIDE - DLEARNT