Installation Guide

ManualsBrandsUnbranded ManualsBath24-Spray Patterns with 5 in. Wall Mount Dual Shower Heads and Handheld Shower in Chrome (Valve Included)

② Locate the hose end with short hose nut and hand

tighten to shower head. IMPORTANT! If hose is not

installed in this manner unit will not operate properly.

③ Place hand-held shower head in rotatable holder. Point

all shower heads away from you and turn on the water full

force. Check for leaks. Re-tighten all connectors if

necessary.

① Attach 3 in 1 fixed mount

shower head by threading

clockwise onto shower arm

with rotatable holder to the

right and 3-way diverter

control handle to the left. Use

a wrench to tighten shower

head nut to a snug fit. Do not

over tighten. Wrap shower

head nut with a cloth if you

are using pliers.

Dual Shower Heads

INSTALLATION

Shower Arm

3 in 1 Fixed

Mount Shower

Head

Hand-held

Shower Head

Rotatable Holder

Long Hose Nut

Hose

Washer

3-way Diverter

Control Handle

Hose Outlet

Short Hose Nut

Washer

Spray Selector

Spray Selector allows you to

select from various spray

patterns. Spray pattern is

controlled by the small lever that

rotates left and right.

To Use 3-way Diverter

To change between the

hand-held or fixed mount spray

or combination of both, turn the

handle on the 3 in 1 fixed mount

shower head clockwise or

counter clockwise.

Note: Several U.S. state and local municipal plumbing

codes require the use of a backflow prevention device when

installing a hand shower. This device is termed a vacuum

breaker. If your hand shower includes a vacuum breaker it

will be located in the plug of hand-held shower.

OPERATION:

Manual Manual