Manualshelf

Instructions / Assembly

ManualsBrandsUnbranded ManualsElectricalFull Motion TV Wall Mount with 28 in. Extension and 26 in. W Backplate by Aeon
123456
Step 6
Swivel - Adjust the flat panel display for off center viewing positions.
Grasp the side edges of the display and then swivel display into its desired
position (Fig.11).
Fig.14
Panning
Retracting the Flat Panel Display
Note:
- Positions the flat panel display at an angle to the wall for viewing
from opposite sides of the room.
Grasp the side edges of the display and then swivel and pull the display
into desired position (Fig.12).
- Positions the display against the wall.
Grasp the side edge of the display, swivel and pull the display into the center
position (Fig.13), and then gently push the display straight back towards the
wall into the retracted position (Fig.14).
Use care when moving the display to ensure that cables do not
become stretched or pinched.
Fig.11
Fig.12
Fig.13
The arm assembly and wall plate may be cleaned with a soft sponge and mild solution of soap
and water.
Be sure not to get moisture on the electrical connections or the display.Caution:
Maintaining the
AEON-40200 / AEON-40300
Universal Cantilever Mount