Instructions / Assembly

ManualsBrandsUnbranded ManualsElectricalFull Motion TV Wall Mount with 28 in. Extension and 26 in. W Backplate by Aeon

Assemble the Adaptor Plate

NOTE:

Recessed Mounting Holes. If the mounting holes are

recessed into the back of the display, use the supplied

spacers to pack the recessed hole. Ensure that the

hook brackets are securely fixed to the display.

Fixed the adaptor bracket onto the display with

the selected mounting screws, square washers,

and any required spacers.

Now slide the opposite mounting rail into position,

align it with the mounting holes, and secure with the

mounting hardware.

Mounting screws

Spacer

Step 1

Insert Slider plate(M/Nx4) into adaptor rails, then insert

the adaptor bracket into adaptor rail, fix adaptor

bracket and slider plate with four philips head screw

M6*15mm(C ) and four metal washers 6 ( G ) using

Philips headcrew driver as shown Fig.3.

Fig.3

Metal Washers Ø 6 (C)

Slider Plate

(M/N)

Philips Head Screw

M6*15mm

Adaptor bracket

Adaptor rail

Select from

Mounting Screws

Adaptor Bracket

Metal Washer

Ø6

Attaching the Display to the Mount

Step 2

Socket Pan Head

Screw M8*12mm (I)

Metal Washer

8mm (H)

Socket pan head screw

M8*12mm

metal washer

8mm

Fig.4.

With the help of an assistant, carefully

lift the display and attach it to the mount

head.

Tighten the screws as shown in Fig . 5 .

BY HAND, insert two socket pan head

screw M8*12mm ( I ) and metal washer 8mm (H)

into threaded holes on the adaptor panel

as shown Fig.4. Leave approximately 3/8”

of exposed thread.

Fig.5.

200x200mm

(J)

(E)

NOTE:

For those with a 200x200(mm)

VESA pattern the adaptor plate

will not be used, instead please

affix your TV to the mount directly.