User Manual

Gear and Door Sequencer Instructions Manual
2/2
7
1～999 Delay 2，XXX * 0.1Second
8
1～999 Delay 3，XXX * 0.1Second
9
1～999 Delay 4，XXX * 0.1Second
Note:
A)
Mode 1:
Radio control channel switch ON: Door 1,2 Open -----(Delay 1) -----Landing Gear Down,
Radio control channel switch OFF: Landing Gear Up-----(Delay 4)----Door 1,2 Close;
Mode 2:
Radio control channel switch ON: Door 1,2 Open -----(Delay 1) -----Landing Gear Down----(Delay 2)
-----Door 1,2 Close
Radio control channel switch OFF: Door 1,2 Open -----(Delay 3)------Landing Gear Up-----(Delay 4)----Door
1,2 Close;
Mode 3:
Radio control channel switch ON: Door 1,2 Open -----(Delay 1) -----Landing Gear Down----(Delay 2)
-----Door 2 Close
Radio control channel switch OFF: Door 2 Open -----(Delay 3)------Landing Gear Up-----(Delay 4)----Door
1,2 Close;
B)
In the Table’s description of Door1,Door2 and Land Gear’s Opened Position/Closed Position, Up/Down
Position, the real situation are depend on your Servo’s type and Install way, Maybe in this Table that show
Closed Position ,but the real one is in Opened Position.
Please pay attention on this different.
ASSAN Electronic Control Technology Co., Ltd.