Use and Care Manual

6
Positi onin g
This unit can easily be moved from one room to another. In doing, so keep this in mind:
• The unit must stand upright on an even surface.
• Do not position near bath, sink, or other permanent, wet or damp area.
• Keep unit at least 18" from wall, curtains, draperies, or heat sources to insure adequate air circulation.
Figure A
Figure E
Exhaust
Hose
Slide Bar
Connector
Figure B
Figure C
Figure D
Fasten
one screw
Adjustable
Slide Bar
Window
Adjustable
Slide Bar
Air Outlet
Installing Exhaust Hose to Window Slide Bar
for AC and Heating
18"
45cm
18"
45cm
Exhaust
Hose
Slide Bar
Connector
Note: The window kit is only designed to be installed with sliding windows or doors. The window kit
is not designed or to be used with casement style windows. Measure your window kit according to the
dimensions of your sliding window. If the unit is larger than your required dimensions, it can be cut
using a saw or power tool. If the unit is too short for your opening, you can order an additional
window kit from our online store to extend it.
After assembling the Innovative AutoDrain Technology as per instructions on page 5, make sure hose is
firmly attached to oval connecter that fits into window slide bar.
Snap hose connecter into window slide bar opening. See Illustration 1.
Extend window slide bar to fit your window opening, either vertical or horizontal, depending on how
the window opens. See Figure D.
Important
The flexible exhaust hose can be extended from 12" to 60" for mounting. We recommend
that you keep the hose as short as possible to minimize possible loss back in the room.
This length has been designed especially according to the specifications of the
unit.
Do not use an extension or exchange for a different hose as that may lead to
malfunctioning.
The exhaust air must flow freely. Any blockage can lead to overheating of the unit. Handle
with care to prevent any kink or bend in the exhaust hose.