Use and Care Manual

10
Emptying The W a ter C o nta i ner
This air conditioning does not require emptying of the water
container, except prior to season end storage.
This portable AC/H features the
Innovative AutoDrain Technology
Very little excess water should accumulate. During the process of
cooling, some of the water accumulated is actually used to cool the
unit internally. This makes the unit run more efficiently. Both this
evaporative technology and Innovative AutoDrain Technology are
features not found in most portable air conditioners.
Switch off the unit and remove the plug
from the outlet.
• Position a flat container or dish on the fl oor
under the drain hole. Do not allow the water to
drip continuously into the container as it might
easily over fl ow.
• Remove the drain knob.
• Remove the rubber plug, the water will flow in the
container. When this is nearly full, replace the plug to
stop the water flow and empty it. Repeat this process
until all water has been removed.
• Replace the rubber plug into the drain hole fi rmly,
the WATER FULL LED should not flash any longer.
• Replace the drain knob.
Rubber plug Drain knob