Specification
ALL DIMENSIONS
ARE IN INCHES
Model Nos.
AC4
PC4
A
Overall Diameter
7.56
7.56
B
Max. Overall Height*
3.94
3.94
B1
Flange Height
Above Subfloor or Slab*
(w/ 1 Sealing Gasket)
0.58
0.58
Flange Height
Above Subfloor or Slab*
(w/ 2 Sealing Gaskets)
0.59
0.59
B2
Flange Depth Below Floor
3.25
3.25
C
Screw Centers
6.76
6.76
D
Min. Flange Depth Below Floor to
Top of Compression Gasket
2.00
2.00
!
!
CFSPEC16v2-4C
TECHNICAL SPECIFICATIONS:
Culwell® Flange 4-in Compression Drop-Fit models are for tile applications with impermeable floor-covering membranes from 30 to 100 mils
thick or without a membrane when the flange is recessed below the finished floor. For replacement or remodeling.
These flanges attach to the sanitary piping system using conventional means that are standard in the industry and are designed to:
•
Allow the flange to seal to the floor, with its flat flush surface design, and seal to a water barrier membrane
to prevent water leakage into the subfloor thereby protecting the property from damage
•
Easily drops into 4 inch Cast Iron or Schedule 40 DWV pipe for accurate toilet bolt alignment without
resistance
Additional features include:
•
Compression joint that allows up to 3 inches of adjustment to the riser
•
Three (3) stainless steel bolts, mechanically tightened from the finished floor to compress the gasket until
firmly pressed against the pipe; can adjust and reposition during and after installation
•
Two (2) elastomeric sealing gaskets; (1) used for sealing with membrane/ (2) used without membrane
•
Eight countersunk holes for secure attachment of the flange to the floor (Screws NOT included)
•
One-of-a-kind nylon clamping ring for superior strength and durability to prevent the need for repair or
replacement in the future, backed by Culnat’s exclusive LIMITED LIFETIME WARRANTY
•
Uniquely engineered flat sealing surface for maximum contact between the flange and floor
•
Clamping ring that compresses an elastomeric sealing gasket against the floor-covering membrane liner to
ensure a water-tight seal, while also engaging with the gasket to keep the closet bolts in place for ease of
toilet installation; Closet bolts are included
*Max. Overall Height and Flange Height Above Subfloor or Slab dimensions do not
include additional height attributed to the thickness of the selected floor-covering
membrane. Flange height in relation to the finished floor will vary depending on the
thickness of the membrane and tile used during installation.
NOTE: Dimensional data is subject to customary manufacturing tolerances.
MATERIALS AND STANDARDS INFORMATION:
•
ABS and PVC flange bodies are made from NSF/ANSI 14 listed materials.
•
Clamping rings are made of nylon that has a flexural modulus of at least 2,000 MPa (290,076 psi), as specified in the Basic Property
Table (Table PA) of ASTM D4066.
Ideal for:
Wet rooms
Small spaces
Multi-floor
Concrete
Bariatric/
Disability
Commercial/
Residential
Model No.
Item No.
Description
UPC / GTIN
Ct
Wt (lbs)
AC4
Culwell® Flange 4-in Compression Drop-Fit
- Black ABS Plastic
861225000288
1
1.11
10861225000285
4
6.625
PC4
Culwell® Flange 4-in Compression Drop-Fit
- White PVC Plastic
861225000295
1
1.28
10861225000292
4
7.325
!