Installation Guide

e Vintage Wood Floor Company VintageWoodFloors.com
e Antique Barrel Collection AntiqueBarrelCollection.com
714-557-9655
[e-mail]
diy stacked
wall panels
Installation Guide
If you have questions during installation or about your purchase please call 949-244-5123. DO NOT return to retailer.
Remove panels from their
carton(s).
Layout on the oor to get
an idea for how you want
them to appear on the
wall and where your cuts
will be made.
Suggested tools for your project:
-Measuring tape
-Pencil
-Eye/Hearing protection
-Brad nail gun to secure each plank to the wall
-Handsaw, chop saw, or circular saw to cut the planks
to length
-Construction adhesive in addition to nailing is
recommended. You can use the caulking gun style.
These panels are carefully
made to reduce (as much
as possible) any gaps be-
tween planks.
However, you may need
to darken the wall surface
to prevent any shadowing
should there be any gaps.
We suggest painting the
wall a darker color, but
this is not necessary in
most cases.
Once you have determined your ideal layout,
we suggest beginning by working from the
bottom-left of the wall or surface you will be
covering. For these instructions, we will assume
you are covering a wall and will proceed from
the bottom left.
Starting Edge
Work away from straight edge
Casing/Trim *optional
Cut at shortest point
to create a straight edge
to start row
CUT
Cut at the end of
the row. Use this piece
to start the next row.
Mark the studs of the wall as your rst step.
You’ll want to make sure to secure the planks to the studs whenever possible.