Installation Guide

16
Fireplace Installation
Log-set / Crystal / Pebble Media Installation
This fireplace style comes with 3 media options: log-set, crystals and pebbles
A. Glass front must be removed and the appliance must be mounted in its
final location before the log-set / crystal / pebble embers are installed.
B. To use log-set, remove the log-set from the package and set on the
log-set designated space. Figure 6-1.
C. To use crystals or pebbles: Crystal or pebbles media may have a fine oil
residue that needs to be cleaned prior to installation. Clean the them with
mild dish soap, drain, rinse thoroughly and dry before placing into the tray.
D. Place the plastic tray to the fireplace designed place. then carefully place
crystal or pebbles embers into the bottom tray on the front of the appliance
as illustrated. Apply an even layer from side to side. Figure
6-2, Figure 6-3, 6-4.
Figure 6-1
Figure 6-2
(For crystal and pebble only)
Figure 6-3 (Crystal media) Figure 6-4 (Pebbles media)