Installation Guide

15
Fig. 5-6
F x 4
C x 4
Fig. 5-5
A x 4
Fireplace Installation
iii. PARTIALLY RECESSED WALL MOUNT INSTALLATION
A. Install 4 metal brackets (2 per side) (supplied) onto the sides of the
appliance (Fig. 5-5).
B. Remove the power cord and complete hard wiring (see “hard wiring
installation” section).
C. Insert the appliance as far into the rough-in frame as possible/
desired, and then secure it by installing 4 screws (supplied) through
the metal brackets (Fig. 5-6).
D. Install media (see “media ember installation” section). You must
complete this step before moving onto the next step.
E. Re-install the front glass.