Installation Guide

13
B
A
Fireplace Installation
Due to the many different materials used on different walls, it is highly recommended that you
consult your local builder before you install this appliance on the wall.
note:
It is recommended the walls of the appliance enclosure be finished (i.e. drywall) to avoid exposed insulation or
vapour barrier coming in contact with the appliance. This will ensure clearance to combustibles is maintained.
A. Select a location that is not prone to moisture and is located at least 36”
(94.1cm) away from combustible materials such as curtain drapes, furniture,
bedding, paper, etc.
B. Measure the appliance and create a rough-in frame with electrical (see
below “framing”).
C. Remove the front glass (see “front glass removal / installation” section).
D. Hold the appliance up to ensure it will fit into the framing.
Finishing Material
B
A
(Non-Load
Bearing)
Framing Size
Model Number
A
B
BG-50B
47.17” (119.80CM)
20.75” (52.71CM)
BG-60B
47.17” (119.80CM)
20.75” (52.71CM)
BG-72B
69” (175.26CM)
20.75” (52.71CM)