User manual

83
UIS [ON / OFF]
To turn ON (on) or OFF (off) the Internet protection
function.
e.g. “UIS ON” is the command to turn on the Internet
protection function.
GET [IP / STATUS]
To get the status of the main unit. The parameter denotes
which information to obtain, IP (WAN and LAN IP address
of the main unit) or STATUS (connection, Internet protection
function and power sockets status).
e.g. “GET STATUS” is the command to get the connection,
Internet protection function and power sockets status of the
main unit.
There will be a delay up to 26 seconds when getting the IP
via Windows® Live Messenger.
If you forget the commands, type “help” and send the message
to the main unit. It will return a command list.
USB port15.
The USB port can be used to operate / charge a USB device.
Insert the USB plug into the USB port. The USB port is not
remotely controllable. It will give a stable voltage output as
long as the main unit is powered.