User manual

64
There are two groups of websites. The rst group
consists of the rst four rows, while the second group
consists of the last row.
The rst group will be considered as timeout only if all
the target servers are not responding.
A power socket can only be assigned to one group.
i.e.
If you assign “All” to the rst group, you cannot •
assign any power socket to the second group;
If you assign the rst power socket to the rst group, •
you cannot assign it to the second group.
Time-out Setting
Set time-out for each
Website / IP Address
If the target server does not
respond within the time limit,
the main unit will consider the
connection to that server as
having failed (timeout). The
default setting is 3 seconds.