User manual

63
Assign Select “All” such that both power sockets •
will follow the settings on the right-hand
side.
Select one of the sockets (“Outlet 1”/“Outlet •
2” to make it follow the settings on the right-
hand side.
Select “None” so that none of the sockets •
will follow the settings on the right-hand
side.
Status Enable or disable the checking function of
that web site / IP address.
Protocol Select the protocol used in the checking.
UDP - a ping request will be used•
TCP - a web request will be used•
Website /
IP Address
Input the target website/server’s IP for the
checking. Use a reliable website (a website
with a stable server) or a stable server.