Instructions / Assembly

B1 - 12pcs 6pcs B2-2pcs

4x25mm pull handle 4x40mm

Attention:

Screws for attaching of the cupboard to

the frame of the workbench.

Assembly Instruction - Cupboard HB-II

Storage cupboard is made from high quality chipboard guaranteeing maximum resistance and long service life.

Parts Packing 1 Packing 2 Date

Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.cz

PAGE 1
Assembly Instruction - Cupboard HB-II B1 - 12pcs 6pcs B2-2pcs Screws for attaching of the cupboard to the frame of the workbench. 4x25mm pull handle 4x40mm Attention: Storage cupboard is made from high quality chipboard guaranteeing maximum resistance and long service life. Parts Packing 1 Packing 2 Date Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.
PAGE 2
Assembly of pull handles on drawers Assembly of pull handles on doors Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.
PAGE 3
„FRAME ASSEMBLY“ for using cupboard "HOBBY I" (HB-I) and "HOBBY II" (HB-II) X = lower predrilled holes for stretchers if cupboard is used. Assembly instruction: 1. Place base (5) Top Rail Support (4) Back Leg (3) and Front Leg with Bench dog holes (2) with dowel holes facing inward as shown (Fig.1). Attach the Base and Top Rail Support to the Front Leg with Bench Dog Holes (2) and Back Leg (3) using four Dowels (18) and Glue (20) for each. Hint: Do not fill up holes by glue.